Wakol MS330 MS Silane Moisture Barrier (DPM)

WAKOL MS330 Silane Primer is a ready-to-use 1-component MS primer for priming absorbent and non-absorbent subfloors, and to reinforce abraded resp. sanded concrete edges.

• DPM in only one layer and dry within 1 hour!
• Free of epoxy and isocyanates
• 1 component = no mixing, no pot life, no waste of material

Ready-to-use quick drying primer

• Quick drying (dry in only 60 minutes)
• Single component silane primer
• One coat only DPM
• Strenghtens the subfloor
• Can be used on absorbent and non-absorbent subfloors
• Solvent and water free
• Usage per m²: approx. 80-120 g/m² as primer, approx. 250 g/m² as moisture barrier
• Packaging (article nr.): 5 kg (167877) and 10 kg (147515)

Product application

• Consolidates the sub floor.
• Binds old adhesive and plaster residues.
• Isolates humidity in sand cement screeds, up to 95% KRL without UFH and up to 85% KRL with UFH.
• After only 1 hour drying, direct installation of wooden floors can be started with a WAKOL MS Parquet Adhesive.
• After only 1 hour drying, self levelling can start with the appropriate WAKOL self levelling compound. Always apply the WAKOL D 3045 Special Primer to the surface before the levelling compound is poured.